The Puresan 310ml Dispenser is a compact, closed-system unit designed to automatically deliver a measured dose of cleaner and deodoriser fluid directly into a urinal or WC.

By dosing at regular intervals, it effectively combats the build-up of bacteria and germs that accumulate on washroom surfaces -helping your service teams maintain higher hygiene standards with less effort.

Its discreet, wall-mounted design can even be installed below the cistern, giving you greater flexibility where wall space is tight. This makes it ideal for smaller washrooms or sites where aesthetics matter.

Puresan Aerosol Fragrance Refills:

The Puresan uses 310 ml concentrated refills available in a wide range of fragrances. Each refill not only eliminates unpleasant odours at the source but also infuses a fresh, pleasant fragrance into the environment.

Combined with its programmable dosing features, the Puresan dispenser and refills range deliver a reliable, cost-effective cleaning and deodorising solution for washroom service providers.

The Puresan dispenser uses 310ml concentrated refills, specially formulated to clean and deodorise washroom surfaces. Available in a variety of fresh fragrances, each refill targets bacteria and odours, helping to maintain a hygienic and pleasant environment.

Refill Fragrance (310ml) Scents to choose from:

• Air Concept
• Bio-Pure*
• Senso Mandarin 

*Bio-Friendly Liquid Refills:

Our bio-friendly liquid refills include Bio Senso, with a refreshing Senso Mandarin fragrance, and Bio-Pure, which is non-fragranced. These eco-friendly products harness natural microorganisms to break down odour-causing substances, completely neutralising odours at their source.

Additionally, they contain biodegradable surfactants derived from coconut oil, ensuring effective cleaning that’s kind to the environment.

What You’ll Need

• Puresan 310ml Dispenser

• Mounting kit (screws and wall plugs – included)

• Drill with 6 mm bit

• Screwdriver

• 2 x C-cell (1.5V) batteries (not included)

• 310ml Puresan refill (sold separately)

1. Choose a Suitable Location

• For best effectiveness, install above the WC cistern or near urinals or sinks

• Mount approximately 1.5–2 metres from the floor

• Ensure the surface is clean, dry, and flat

2. Mark and Drill Holes

• Open the dispenser cover

• Use the backplate as a template to mark two drill points

• Drill two 6 mm holes and insert wall plugs

3. Mount the Dispenser

• Align the dispenser with the drilled holes

• Secure it to the wall using the provided screws

• Ensure it is firmly fixed

4. Insert Batteries

• Open the battery compartment inside the dispenser

• Insert 2 x C-cell batteries, checking the correct polarity

• Close the compartment securely

5. Insert the Refill

• Open the dispenser cover

• Insert a 310ml Puresan refill bottle with the nozzle facing forward

• Close the cover

6. Program the Dispenser

• Use the control panel to set spray intervals and operating hours

• Refer to the user manual for full programming options

• Press OK to confirm settings

7. Test and Finish

• Press the test button to ensure proper spray function

• Close and lock the cover if required

• Your dispenser is now ready for use!